Manufacturer/Supplier to the Pyrotechnic Community   

Electric Match Heads

 These small printed circuit board chips have a thin nichrome bridge wire wrapped and soldered to the tip, ie. the hard work has been done.

The Do-It-Yourselfer can then cut twin lead wire to his desired length
and solder to both sides of the head.  Dip the head into a pyrogen
and voila, an electric match for pennies.

We have both #50 gage match heads (low current - comparable to standard matches) and #38 gage match heads (requires higher current).

For an illustrated step by step procedure click here.  Making e-matches

100 pieces - $12.00
500 pieces - $45.00
1000 pieces - $70.00 +S&H

Back